Tuesday, October 17, 2017

project 4.2

Here is my interactive script inspired by Jackson Pollock.  I learned how to use random and tried very hard to use pernil noise to have gradual changes in random stroke widths.  But I never could get pernil noise to work so it is still on the random setting

Processing 
  • void setup() {
      size(640, 360);
      background(102);
    }

    void draw() {
      strokeWeight(random (25));
     
      if (mousePressed == true) {
        line(mouseX, mouseY, pmouseX, pmouseY);
      }
    }

Project 4.1


  • Inspired by Islamic Tiling Patterns, create a piece of Algorithmically generated art. The piece must be generated by a computer program and realized in the physical world (printed, drawn, embroidered, cut, stamped, etc…)
  • On your blog, document the entire process of making your project. Include images of the pieces that inspired you and images of each step in the process.

I first created the design in scratch with lines going across horizontally. I showed the instructor and asked for suggestion on how to use the embroidery machine, he suggested redo the design in turtle stitch and rather than going line by line start with a block unit and repeat. So I redid the design in turtle stitch and had it embroidered but I did not know about the stitch length and it was very loose with very long stitch lengths. I again made more adjustments in turtle stitch and embroidered again with shorter stitch lengths.

Monday, October 2, 2017

Project 3.3

Record an idea for a lesson (not a full TC-style Lesson Plan) that uses Scratch and/or MaKey MaKey. In a few sentences, describe your idea on your blog.

Lesson Plan:
Makey Makey with scratch Sound modulation using Theremin foundation (Not really sure how to do this, but I been researching and it seems like it can be done

Materials needed:
Makey makey kit, scratch software, a computer with the Arduino IDE and Max MSP (or any program that creates sound and can read serial data), graphite pencil and paper.

Set up:
Prepare 4 sheets with thick line drawn across the page ending in circular point on each end. Prepare alligator clips from makey makey kit and hook up makey makey board to computer using the usb cord. 

Directions:
On computer down load the instuctions (http://www.instructables.com/id/Makey-Makey-Paper-Theremin/) and prepare the four sounds for each paper and download the script for the Theramin along. Connect the alligator clip to one end of the graphite line and run finger along line to get a sound that is determined by the variation in voltage as you move further away from the point with the alligator clip. Try another paper with a different sound effect added to the same original sound.

Project 3.2

Dream up a unique and fun human-computer interface that uses the Makey Makey. You do not have to build the device, but draw a diagram and write an explanation. Put the diagram and explanation on your blog.

My idea is a water fountain that increases or decreases in height according to the pitch of ones voice.  Higher pitch vocal sound will cause the fountain to spray high, the lower pitch vocal sound will cause the fountain to spray low. 

Project 3.1

Create a music instrument using the Makey Makey and a computer. Either take a video of the device and post that to your blog, or bring the device to class.



This project is basically the same as the banana piano, except water is used in place of the bananas.