Tuesday, October 17, 2017

project 4.2

Here is my interactive script inspired by Jackson Pollock.  I learned how to use random and tried very hard to use pernil noise to have gradual changes in random stroke widths.  But I never could get pernil noise to work so it is still on the random setting

Processing 
  • void setup() {
      size(640, 360);
      background(102);
    }

    void draw() {
      strokeWeight(random (25));
     
      if (mousePressed == true) {
        line(mouseX, mouseY, pmouseX, pmouseY);
      }
    }

Project 4.1


  • Inspired by Islamic Tiling Patterns, create a piece of Algorithmically generated art. The piece must be generated by a computer program and realized in the physical world (printed, drawn, embroidered, cut, stamped, etc…)
  • On your blog, document the entire process of making your project. Include images of the pieces that inspired you and images of each step in the process.

I first created the design in scratch with lines going across horizontally. I showed the instructor and asked for suggestion on how to use the embroidery machine, he suggested redo the design in turtle stitch and rather than going line by line start with a block unit and repeat. So I redid the design in turtle stitch and had it embroidered but I did not know about the stitch length and it was very loose with very long stitch lengths. I again made more adjustments in turtle stitch and embroidered again with shorter stitch lengths.

Monday, October 2, 2017

Project 3.3

Record an idea for a lesson (not a full TC-style Lesson Plan) that uses Scratch and/or MaKey MaKey. In a few sentences, describe your idea on your blog.

Lesson Plan:
Makey Makey with scratch Sound modulation using Theremin foundation (Not really sure how to do this, but I been researching and it seems like it can be done

Materials needed:
Makey makey kit, scratch software, a computer with the Arduino IDE and Max MSP (or any program that creates sound and can read serial data), graphite pencil and paper.

Set up:
Prepare 4 sheets with thick line drawn across the page ending in circular point on each end. Prepare alligator clips from makey makey kit and hook up makey makey board to computer using the usb cord. 

Directions:
On computer down load the instuctions (http://www.instructables.com/id/Makey-Makey-Paper-Theremin/) and prepare the four sounds for each paper and download the script for the Theramin along. Connect the alligator clip to one end of the graphite line and run finger along line to get a sound that is determined by the variation in voltage as you move further away from the point with the alligator clip. Try another paper with a different sound effect added to the same original sound.

Project 3.2

Dream up a unique and fun human-computer interface that uses the Makey Makey. You do not have to build the device, but draw a diagram and write an explanation. Put the diagram and explanation on your blog.

My idea is a water fountain that increases or decreases in height according to the pitch of ones voice.  Higher pitch vocal sound will cause the fountain to spray high, the lower pitch vocal sound will cause the fountain to spray low. 

Project 3.1

Create a music instrument using the Makey Makey and a computer. Either take a video of the device and post that to your blog, or bring the device to class.



This project is basically the same as the banana piano, except water is used in place of the bananas.

Tuesday, September 26, 2017

Using Scratch, reflect on the week’s reading and create an interactive art piece
about an experience from your childhood that influenced or inspired you. Share

the Scratch program on your blog.
I just realized this has an interactive component.  I suppose if I were to add an interactive component, it would be clicking the turntables to hear different songs.  The amount of time it took me just to do this was too much, i could never figure out how to use loops with multiple sprites and actions, so each action was basically an individual script(s).  I really like what I made though, not often I am satisfied with my work.

Friday, June 30, 2017

3rd credit project

This project is an extension of the sand paintings I do and merging it with my music/dj'ing background. It has been something I have been wanting to do for sometime. Once I got all the materials, I had fun experimenting with different sounds but none really had sustained a certain sound or frequency long enough allow the sand to form patterns. So I bought a roland digital clone of the famous roland TB303 which could modulate sounds and it did the trick. I then spent quite a bit of time in the wood shop making the drum and I really liked how it came out. If I wasn't in such a rush I probably would have made a way to access the speaker a little better. After I set it up, I noticed a few things that could be improved on. 1) I need to sift the sand to make sure all the fine powder or dust is removed and also to make sure all the grains are relatively uniform by eliminating the large grains and small one as well. I think by doing this the sand will more likely form more noticeable patterns like the salt which is fairly uniform in size. 2) I need to spend the extra time to level the surface of the drum because the patterns tended to move towards the edge or the side that was lower. I think I will need to use a level of some sort,to level the drum head so the sand patterns will be centered. Other than that I thought the patterns were very cool and I spent a few hours just playing with the synthesizer and creating different patterns.



final project - scanography, justice, collage

I was so intrigued with the 3D aspect of the scans we did in class and as homework, I really wanted to explore the scanography in 3D.  So I made a 3D collage in the form of a diorama using the famous painting of John Gast, typically associated with manifest destiny.  This is where I thought the theme of justice would be appropriate, where the Native Americans are fighting colonialism and imperialism protected by a wall representing treaty rights.  When I finally finished my diorama the myers studio lab had already closed for the break and was not opening till summer B started, so I used the scanner in the thingspace.  It was not as good as the scanners in the myers lab.  I did like one of the scans which had an abstract feel to it.

Friday, June 23, 2017

HW 4/1: Creative Assignment Laser-cutting

I really enjoyed the process of laser engraving/cutting. I thought that after doing a small report on the process for class I knew the process, because I was familiar with various methods of cutting different materials and sand blasting or etching for engraving. But as I made my logo design and put it in the laser cutter I was impressed with the accuracy and clean cuts it made. It made me think of intricate details that are now possible that I would not have normally considered. I think I would like to attempt more art works using the laser cutter.

HW 4/2: Creative Assignment Tinkercad:




I was very excited to try the laser cutter. I couldn’t think of anything right off I wanted to model but after a few moments I decided that as a DJ, it would be nice to make a turntable. I enjoyed modeling it and it brought back some skills I learned when I designed characters on light-wave, an animation software before Maya. With the help of Jesse we found a design flaw, which prevented the printer from working, after fixing the flaw the turntable was printed and I think they turned out really cool.

HW 4/4: Continue working on your final project, due for presentation on Day 5.

HW 4/4: Continue working on your final project, due for presentation on Day 5.

HW 4/5: Readings: Share two take-aways.

In the first article most of the projects that the article suggested could be activities easily done in art & music. There were only a few that were science related such as the physics activities that used motors, sensors, etc..

 It seems that from the beginning the educational uses of computer for students were mainly art oriented. Second article I was a little disappointed in the focus on western inventors or makers, but that is nothing new. I know all people are makers, especially non-western people who do not have the luxury of having the wealth of materials to work from of the technological knowledge. Yet people across the globe continually innovate and make useful items from the meager, standard materials generally thought of as not being worthy to even considered as something as maker’s stock of supplies. Another thing I find a bit exclusionary is the focus on making using digital technology. While it may be something worthwhile to pursue in industrialized countries, for many third world countries which is similar to most indigenous nations in the U.S. Access to electricity, internet, computers is still a big obstacle. However the maker philosophy is alive as indigenous people continually innovate to make life easier using whatever is at their disposal. I am reminded of a Navajo boy who live in a house with no heat with his mother and grandparents. He used a radiator from an abandoned vehicle and contructed a makeshift heater. Using soda pop cans he painted them black and put the on the radiator and the water heated up and rose in the hoses connected to the small heater core inside the house emitting the heat and the cold water went back outside to the radiator.

HW 4/6: Write 2 paragraphs about the place of technology in the curriculum.

HW 4/6: Write 2 paragraphs about the place of technology in the curriculum. Use this as a device to revisit some of the digital materials we have explored and their potential connections to art classrooms and/or studios.

 I think technology definitely is becoming a necessary part of our lives and it is increasingly important for students to learn the basics of technology to be able to survive. I remember when I was in school a class in typewriting was still optional but highly suggested if you plan to work in a office or were continuing school at the college level.  Now it is mandatory and kids are practicing keyboarding skills at the elementary level and thereby becoming more adept to using the computer for school assignments.

I think with time some skills will be mandatory and others continue to optional. The use of technology in art classrooms, I feel is still on the fridges for various reasons. For me, as I consider my hometown and the schools I taught at, it is still a novelty.  But for schools in urban areas, I think there are more options and as schools move towards a STEM curriculum the opportunities for art and technology are more plentiful. I think the inventive spirit could still be groomed and developed in more rural areas using local materials that are plentiful and when its possible connect to inventions to technology.